Introduction: Wooden Ford 1903 Logo
Hello everyone, in this project I wanna show you how to make Wooden Ford 1903 Logo. I made video and step by step instruction how to make it. It is very easy and cheap project.
So, let's go to work :)
Materials:
- wood
- wood varnish
- wood filler
- template (step 3)
Tools:
- sandpaper
- cnc router or chisel
Step 1: Watch the Video
Video will give you a good overview on how to create such a Wooden Ford 1903 Logo. But the following steps will still contain some extra useful information.
Step 2: Find Material
First find a good material for logo. I used beech wood and cut to size around 200x250x25 mm . Remember wood must be dry!
Step 3: Engrave Logo
To engrave logo in wood I used cnc router. I prepared template in PDF and EPS files, you can download it below.
Step 4: Improve Surface
After cnc router surface and side walls aren't look very good. To improve it I used sandpaper and belt sander.
Step 5: Fill Engrave
To make contrast between engrave and wood, use wood filler. I used dark color. And good advice: better is fill holes with few thin layers than one thick layer :) I filled 3 times. When first layer is dry, use sandpaper and again wood filler, sand papper. When your surface is perfectly flat time to next step.
Step 6: Paint Logo
Now time to paint logo. I used clear varnish.
Step 7: Finish
Your Wooden Ford 1903 Logo is completely finished :)
You did it!
Please subscribe my Youtube channel for more projects :)
Thomas Workshop Youtube channel
If you have any questions leave a comment below :)
Participated in the
CNC Contest 2016